White & Grey Marble Surface V3 // Skin Decal Wrap Kit for Nintendo Switch Console & Dock, Joy-Cons, Pro Controller, Lite, 3DS XL, 2DS XL, DSi, or Wii - Vinyl Skin Wrap for Nintendo Switch 2, OLED, Lite, Pro Controller, Wii & Classic Handhelds
Description
White & Grey Marble Surface V3 // Skin Decal Wrap Kit for Nintendo Switch Console & Dock, Joy-Cons, Pro Controller, Lite, 3DS XL, 2DS XL, DSi, or Wii — Vinyl Skin Wrap for Every Nintendo Switch (and Every Classic Nintendo Console)
Quarried-look marble on a Nintendo console — expensive taste, gamer budget. Wrap your Nintendo console with the White & Grey Marble Surface V3 // Skin Decal Wrap Kit for Nintendo Switch Console & Dock, Joy-Cons, Pro Controller, Lite, 3DS XL, 2DS XL, DSi, or Wii premium vinyl skin from DesignSkinz — printed on 3M™ cast vinyl, precision-cut for the entire Nintendo Switch family plus the classics: from Switch 2 down to the DSi XL. Pick your exact console at checkout, choose Soft Matte for silky grip or Ultra Gloss for glass-deep color, and ship from our USA facility in 1–7 business days.
What you get
- Full-body vinyl skin set, precision-cut for the exact Nintendo console you select
- Cut-outs for every button, joystick, trigger, port, vent, kickstand, IR sensor, NFC reader, and speaker
- Air-release adhesive backing for bubble-free installation
- Application card and step-by-step instructions
- Compatible with Nintendo dock, official carrying cases, and most third-party grip shells
Why a vinyl skin instead of a hard case
A grip case adds 4–8mm of bulk and changes the weight balance of the Joy-Cons. A premium vinyl skin gives you full-body protection from scratches, abrasion, and UV fade without changing how the console feels — your Switch still slots into the dock, fits the official carrying case, and detaches Joy-Cons cleanly. Plus, you can swap the look in ten minutes whenever you're tired of it.
Built right · the materials story
- 3M™ IJ180mC cast vinyl — the same material used on luxury cars and aircraft, not the cheap calendared vinyl most competitors sell
- 0.06 mm thickness — thinner than a credit card, with no perceivable bulk
- ±0.2 mm cut tolerance — laser-precise port, button, vent, and kickstand alignment
- Air-release pressure-sensitive adhesive — repositionable during install, locked-in after 24 hours
- Crystal-clear protective lamination — UV, scratch, and chemical resistant; rated for 5+ years of daily use
- Operating temperature −40°F to 220°F — survives airports, road-trip pockets, and 12-hour Tears of the Kingdom marathons
- Printed on demand in the USA — never warehoused, never wrong-color, never wrong-fit
Compatibility — every Nintendo console we still cover
- NEW! Switch 2 (2025) — $39.99 · full-body kit covering console + Joy-Con 2 + dock back
- Switch (OLED) (2021) — $34.99 · OLED console + Joy-Cons + dock
- Switch (Original) (2017) — $32.99 · original console + Joy-Cons + dock
- Switch LITE (2019) — $29.99 · full-body kit for the all-in-one handheld
- Pro 2 Controller (2025) — $24.99 · front + back kit for the Switch 2 Pro Controller
- Wii (2006) — $24.99 · wrap for the original white console + sensor bar
- DSi XL (2009) — $19.99 · full-body for the larger-screen DSi handheld
- 2DS XL — $19.99 · full-body for the slimmer 2DS XL handheld
- Pro Controller — $17.99 · front + back skin for the Switch Pro Controller
- Wii Classic Controller — $5.99 · skin for the iconic Wii Classic gamepad
Pick the exact console at checkout. Each one has a different size, button layout, and kickstand — so each gets its own die-cut variant. Don't buy a generic one-size-fits-all wrap; you'll regret it the first time you dock the Switch.
Soft Matte vs Ultra Gloss — which finish is right
- Soft Matte — silky tactile grip, hides fingerprints, gives the console a Pro-level non-reflective look. Best for handheld and marathon sessions.
- Ultra Gloss — wet-look depth that makes color art pop like a printed photograph. Best for designs with deep blacks, holographic, or photographic artwork.
Install in 8–12 minutes — even if you've never wrapped before
- Wipe the console, Joy-Cons, and dock with the included alcohol prep wipe.
- Start with the back panel — line up the kickstand cutout first; everything else follows.
- Apply the console front trim around the screen, then wrap the side rails.
- Joy-Cons are last — they have separate front and back pieces. Slide them onto the console once applied.
- Apply the dock back skin (front stays bare so the LED indicator shows).
- Let the adhesive cure for 24 hours before heavy docking or travel.
Air-release adhesive lets you lift, reposition, and re-press as many times as you need before it locks in. If you mess up during install, email a photo — we'll send a free replacement, no questions asked.
Care & longevity
Wipe with a damp microfiber cloth and mild soap. Avoid acetone, harsh solvents, and abrasive scrubbers. The lamination is rated for 5+ years of daily use, but most customers swap designs every 6–12 months for the variety. Pulls off clean and residue-free whenever you're ready for the next look.
Frequently asked questions
Will the skin fit my exact Nintendo console?
Yes — pick your exact console at checkout (Switch 2, Switch OLED, Switch Original, Switch Lite, Pro Controller, Wii, 2DS XL, 3DS XL, or DSi XL). We precision-cut a separate die for every console; you're not buying a one-size-fits-most generic wrap.
Can I dock my Switch with the skin on?
Yes. The vinyl is just 0.06mm thick — well within the dock's tolerance. Switch 2, OLED, and Original all dock normally with the skin applied. The dock connector and cooling vents are precision-cut and unobstructed.
Does the skin affect handheld grip or buttons?
No. Soft Matte gives the console a silky non-slip grip — many customers say it's more comfortable than the bare plastic. Every button, joystick, trigger, vent, IR sensor, and speaker has a precision cut-out.
Will it leave residue when I remove it?
Zero residue. The 3M™ pressure-sensitive adhesive is engineered for residue-free removal, even after years. The same property that lets 3M-wrapped luxury cars peel back to factory paint.
Can I use a grip case or shell over the skin?
Yes. The 0.06mm skin fits inside Hori grips, Skull & Co. shells, JSAUX-style cases, and the official Nintendo carrying case without modification. Many customers go skin-under-grip for layered protection.
Will it interfere with the kickstand?
No. The kickstand cut-out (Switch OLED has a wide kickstand; Original Switch has the narrow flip-style; Switch 2 has the redesigned U-stand) is die-cut for that exact model — kickstand opens, closes, and adjusts normally.
Does the skin block IR, NFC, or Joy-Con sync?
No. The vinyl is non-conductive and non-RF-blocking. Right Joy-Con IR camera, NFC amiibo reader on the right Joy-Con, and Bluetooth pairing all work normally over the skin.
How long does the install take?
About 8–12 minutes for a full Switch + Joy-Cons + dock kit. Five for Lite or Pro Controller. The air-release adhesive lets you lift, reposition, and re-press as many times as you need before it locks in.
Is it waterproof?
Splash- and sweat-resistant. The lamination shrugs off normal hand oils, condensation, and drink spills. Don't dunk it. Switch's IP rating is unchanged.
What's your return policy?
30-day no-questions-asked replacement or refund. If the White & Grey Marble Surface V3 // Skin Decal Wrap Kit for Nintendo Switch Console & Dock, Joy-Cons, Pro Controller, Lite, 3DS XL, 2DS XL, DSi, or Wii skin doesn't fit, doesn't apply cleanly, or you just don't love it — email support@designskinz.com and we'll make it right.
Loved by Nintendo gamers since 2011
DesignSkinz has been making premium 3M vinyl skins since 2011, with a curated catalog of 1,000,000+ designs across every device that matters — Nintendo Switch (2 / OLED / Lite / Original), Pro Controller, Wii, 3DS XL, 2DS XL, DSi XL, plus iPhone, Samsung Galaxy, MacBook, Steam Deck, and Yeti tumblers. The White & Grey Marble Surface V3 // Skin Decal Wrap Kit for Nintendo Switch Console & Dock, Joy-Cons, Pro Controller, Lite, 3DS XL, 2DS XL, DSi, or Wii design is part of our actively-curated Nintendo collection, made in small batches, printed only when you order it. Independently owned. Made in USA. Shipped worldwide.
Last updated: April 2026.
A note on trademarks
Nintendo®, Nintendo Switch®, Switch Lite®, Switch OLED®, Joy-Con®, Pro Controller®, Wii®, 3DS®, 2DS®, and DSi® are trademarks of Nintendo Co., Ltd. DesignSkinz is not affiliated with, endorsed by, or sponsored by Nintendo. This is a premium third-party vinyl skin made to be compatible with the Nintendo console listed at checkout. All artwork featured is the property of DesignSkinz or its respective artists.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
Returns
Our policy lasts 15 days. If 15 days have gone by since your item was shipped, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Custom items made specifically for you cannot be returned.
To complete your return, we require a receipt or proof of purchase.
There are certain situations where only partial refunds are granted: (if applicable)
Shipping charges will not be refunded on our products. Think about it, we had to spend money to produce your item and ship it. These are charges we cannot be reimbursed for.
Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
Any item that is returned more than 15 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at
null.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at return@designskinz.com and send your item to: Design Skinz , 812 Cahill Court Danville - US 24541.
Shipping
To return your product, you should mail your product to: Design Skinz , 1030 McConville Road - Suite #3, Lynchburg, VA - US 24502
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.