Raw Wood Planks V11

Raw Wood Planks V11 — Vinyl Skin Wrap for iPhone (Every Model Since 2007)

Real-grain wood textures rendered on premium vinyl — tactile, warm, and unmistakably hand-finished. Wrap your iPhone with the Raw Wood Planks V11 premium vinyl skin from DesignSkinz — printed on 3M™ cast vinyl, precision-cut for every iPhone Apple has ever shipped (the original 2007 iPhone through the brand-new iPhone 17 Pro Max, 17 Pro, and 17 Air). Pick your exact model and finish at checkout, and we'll laser-cut, print, finish, and ship from our USA facility within 1–7 business days.

What you get

• One full-body vinyl skin precision-cut for the exact iPhone model you select
• Cut-outs for the camera array, Camera Control button (16/17), Action Button (15 Pro+), MagSafe ring, speakers, mics, and Lightning/USB-C port
• Air-release adhesive backing for bubble-free installation
• Application card and step-by-step install instructions
• Compatible with MagSafe accessories, Qi wireless chargers, and any standard case

MagSafe & accessory compatibility

The Raw Wood Planks V11 skin is just 0.06 mm thick — well within MagSafe's magnetic alignment range. MagSafe chargers, wallets, and car mounts all work normally over the skin. Qi wireless charging works at full speed. Standard MagSafe cases and third-party shells (OtterBox, Spigen, etc.) slip over the skin without any modification — most customers use a skin under a case for layered scratch protection. The skin does not affect signal strength, antenna performance, or the iPhone's water resistance rating.

Camera Control & Plateau coverage (iPhone 16 / 17 series)

The new Camera Control button on iPhone 16, 16 Pro, 17, 17 Pro, and 17 Pro Max requires haptic and capacitive sensing to function. Our skin includes a precision cut-out around the Camera Control so the half-press, full-press, and slide gestures all work exactly as Apple designed them. Same for the Action Button on iPhone 15 Pro+. The new iPhone 17 Pro camera plateau (the raised camera bar) gets a separate die-cut piece that wraps around the plateau cleanly without bunching or lifting.

Skin vs case vs both — which is right for you

	Skin only	Case only	Skin + case
Adds bulk	No (0.06 mm)	Yes (3–6 mm)	Same as case
Drop protection	Light (scratch only)	High	Highest
Scratch resistance	High	Medium	Highest
Grip	Soft Matte = grippy	Varies	Best of both
Customization	Total — 1M+ designs	Limited	Total
Resale value	Preserved (residue-free)	Preserved	Preserved

Built right · the materials story

• 3M™ IJ180mC cast vinyl — the same material used on luxury cars and aircraft, not the cheap calendared vinyl most competitors sell
• 0.06 mm thickness — thinner than a credit card, with no perceivable bulk
• ±0.2 mm cut tolerance — laser-precise port, button, and camera alignment
• Air-release pressure-sensitive adhesive — repositionable during install, locked-in after 24 hours
• Crystal-clear protective lamination — UV, scratch, and chemical resistant; rated for 5+ years of daily use
• Operating temperature −40°F to 220°F — survives airports, car-mount summers, and ski-trip pockets
• Printed-on-demand in the USA — never warehoused, never wrong-color, never wrong-fit

Soft Matte vs Ultra Gloss vs Cover Logo / Logo Cutout — which to pick

• Soft Matte finish — silky tactile grip, hides fingerprints, gives the iPhone a Pro-level non-reflective look. Best for daily carry and Soft-Matte iPhone lovers.
• Ultra Gloss finish — wet-look depth that makes color art pop like a printed photograph. Best for designs with deep blacks, holographic, or photographic artwork.
• Cover Logo — the skin design covers the Apple logo on the back, giving the iPhone a total-art look.
• Logo Cutout — a precision die-cut around the Apple logo so it shows through. Best if you want the design framing the logo, not replacing it.

Compatibility — every iPhone since 2007

Pick your exact iPhone model at checkout. We precision-cut a separate die for every model — yes, every one:

• IPhone 17 Pro Max
• IPhone 17 Pro
• IPhone 17 Air
• IPhone 17
• IPhone 16e
• IPhone 16 Pro Max
• IPhone 16 Pro
• IPhone 16 Plus
• IPhone 16
• IPhone 15 Pro Max
• IPhone 15 Pro
• IPhone 15 Plus
• IPhone 15
• IPhone 14 Pro Max
• IPhone 14 Pro
• IPhone 14 Plus
• IPhone 14
• IPhone SE (3rd Gen, 2022)
• IPhone 13 Pro Max
• IPhone 13 Pro
• IPhone 13
• IPhone 13 Mini
• IPhone 12 Pro Max
• IPhone 12 Pro
• IPhone 12
• IPhone 12 Mini
• IPhone SE (2nd Gen, 2020)
• IPhone 11 Pro Max
• IPhone 11 Pro
• IPhone 11
• IPhone XS Max
• IPhone XS
• IPhone XR
• IPhone X
• IPhone 8 Plus / 8
• IPhone 7 Plus / 7
• IPhone SE (1st Gen, 2016)
• IPhone 6s Plus / 6s
• IPhone 6 Plus / 6
• IPhone 5s / 5c / 5
• IPhone 4s / 4 / 3GS / 3G / Original (2007)

Don't see your iPhone? Email support@designskinz.com — odds are we have it and just haven't listed it yet.

Install in 5 minutes — even if you've never wrapped before

1. Wipe the iPhone with the included alcohol prep wipe and let it air-dry for 30 seconds.
2. Peel the backing paper from one corner of the back piece. Do not touch the adhesive.
3. Hold the skin above the iPhone and line up the camera cut-outs first; the rest of the alignment follows.
4. Lower the skin onto the iPhone from the camera end first. Press from the center outward with the included application card to push out any air.
5. Roll the skin onto the side rails. The vinyl conforms to curves; press firmly along the edges.
6. Repeat for any front trim, button rings, or port surrounds included with your model.

Air-release adhesive lets you lift, reposition, and re-press as many times as you need before it locks in. If you mess it up during install, email us a photo — we'll send a free replacement, no questions asked.

Care & longevity

Wipe with a damp microfiber cloth and mild soap. Avoid acetone, harsh solvents, and abrasive scrubbers. The protective lamination is rated for 5+ years of daily use, but most customers swap designs every 6–12 months just for the variety. The vinyl pulls off clean and residue-free whenever you're ready for the next look.

Frequently asked questions

Do iPhone skins damage the phone?

No. The 3M™ pressure-sensitive adhesive is engineered for residue-free removal — the same property that lets 3M-wrapped luxury cars peel back to factory paint. We've seen iPhones removed and reapplied for 3+ years with zero residue. Skins do not affect waterproofing, wireless charging, MagSafe, antenna performance, or signal strength.

Does this skin work with MagSafe?

Yes. The vinyl is just 0.06mm thick — well within the MagSafe magnet's effective range. MagSafe chargers, MagSafe wallets, and MagSafe car mounts all work normally. Wireless Qi charging also works without modification.

Can I use a case over the skin?

Yes — and most customers do. The 0.06mm thickness fits comfortably inside any standard MagSafe case, Apple silicone case, OtterBox, Spigen, or third-party shell. The skin protects the iPhone from scratches under the case; the case protects from drops over the skin.

Does it cover the Camera Control button on iPhone 16/17?

Yes. The skin includes a precision cut-out around the Camera Control button so the haptic and capacitive sensing work normally. Same for the Action Button on iPhone 15 Pro+ and the camera plateau on iPhone 17 Pro.

Will it leave residue when I remove it?

No residue. Peel slowly from a corner at a low angle. If any adhesive lifts during removal, dab with a clean cotton ball and a drop of isopropyl alcohol — wipes off immediately.

Does the skin block wireless or MagSafe charging?

No. The vinyl is non-conductive and thin enough to pass MagSafe magnetic alignment and Qi wireless charging coils without any speed reduction.

Will it fit my exact iPhone model?

Pick your exact iPhone model from the dropdown at the top of this page — we precision-cut every variant individually. The 51 supported models are listed below in the Compatibility section, from the original 2007 iPhone through iPhone 17 Pro Max.

How long does the install take?

Five minutes for a first-timer. The air-release adhesive lets you lift, reposition, and re-press as many times as you need before it locks in. If you mess it up during install, email us a photo — we'll send a free replacement, no questions asked.

Is the skin waterproof?

Splash- and sweat-resistant. The protective lamination shrugs off normal hand oils, condensation, drink spills, and rain. The skin does not affect the iPhone's IP rating — your phone retains the same water resistance Apple ships from the factory.

What's your return policy?

30-day no-questions-asked replacement or refund. If you don't love the Raw Wood Planks V11 skin, email support@designskinz.com within 30 days and we'll make it right. We've stood behind every skin we've shipped since 2011.

Loved by Apple users since 2011

DesignSkinz has been making premium 3M vinyl skins since 2011, with a hand-curated catalog of 1,000,000+ designs across every device that matters — iPhone, Samsung Galaxy, MacBook, iPad, Apple Watch, AirPods, Switch 2, Steam Deck OLED, Yeti tumblers. The Raw Wood Planks V11 design is part of our actively-curated iPhone collection, made in small batches, printed only when you order it. Independently owned. Made in USA. Shipped worldwide.

Last updated: April 2026.

A note on trademarks

Apple®, iPhone®, MagSafe®, Camera Control™, and Action Button™ are trademarks of Apple Inc. DesignSkinz is not affiliated with, endorsed by, or sponsored by Apple. This is a premium third-party vinyl skin made to be compatible with the iPhone. All artwork featured is the property of DesignSkinz or its respective artists.